Built with street and park riding in mind, Spank's Tweet 1/2-link chain keeps you moving and looks great to boot. - "Purpose Built" - Dirt/Vert/Park & Fixed Gear - Single Speed, Offset & Half Link - Pulling Force Tested Up To 1,300kgf - Heat Treated Reinforced Alloyed Steel - Length: 102 Links, 1/2" x 1/8" - Weight: 395g
CN-E6070-9 Chain (9-speed) FEATURE - New chain plate dimension BENEFIT - Reinforced against chain cut for E-BIKE use - More efficient and silent, less maintenance by SHIMANO “SIL-TEC”(CN-E6090-10) - Front single gear only
- 10-speed chain for Shimano STEPS E8000 e-bike system - Single chainring only - SIL-TEC - 276 g - HG-X 10-speed
Chain FEATURE - Anti-corrosion treatment for longer service life BENEFIT - Anti-Corrosion
- 9-speed compatible - XT/Ultegra - 116 links
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links
Beyond an incremental improvement. The Flattop technology of the SRAM Force chain creates a lighter, quieter, stronger chain. Ride far, long and fast—this chain can go the distance. - Flattop technology allows for a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner and outer plates for faster and more precise shifts
The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment. - Not for use with front derailleur drivetrains - Links (links): 126 - Drivetrain Speeds: 12 - Chain Connection Type: Single Use Master Link - Half Link Chain: No - Weight: 260 - Compatibility: All levels of Eagle drivetrain systems
The basis of every Eagle drivetrain is its chain—and the NX Eagle chain is designed and manufactured using genuine SRAM Eagle architecture, so it is fully compatible with every other component in the Eagle ecosystem. The NX Eagle chain features solid pin construction, Eagle PowerLock, and smooth, efficient shifting that you can count on every time out. Features/Specs - Eagle PowerLock chain connector with FLOW LINK technology provides better chain-guiding and increased longevity - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings - Weight: 278g (126 links) - Material: steel - Speeds: 12 - Compatibility: All levels of Eagle drivetrain systems
SRAM's PC-1 Single Speed Nickel Chain is designed for singlespeed bicycles so it won't jump off when you're laying down the power. It comes with a connector link for easy installation and removal.
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.
SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.
SRAM's PC-850 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth, reliable and very affordable, the PC-850 is a fine value.
SRAM’s PC-991 Chain delivers light weight, strength, quick shifting and smoothness to your drivetrain. It boasts chrome-hardened pins and inner and outer sideplates engineered to speed and smooth shifting in all conditions. And, with its great PowerLink, you don’t even need tools to install it.
The all-new SRAM RED chain was redeveloped from the ground up. The unique link shape allows the chain to be narrower and lighter while increasing strength and providing more space between the outer plates of the chain and the cogs on either side. The result: a quieter chain with faster, more precise shifts. - Flattop technology enables a narrower chain with quieter operation and increased strength and durability - Hard Chrome plated inner link plates and rollers for reduced wear and prolonged life - HollowPin construction for increased strength and efficiency - Chain length: 114 links
SRAM's RED 22 11-Speed Hollow Pin Chain features hollow pins for low weight, strength, and accurate shifting in all conditions. The heavily chamfeRED outer plates improve shifting and an inner plate finish provides longer chain life. And, with its great PowerLock connecting link, installation and removal is a snap.
With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.
- 1/2" x 3/16” - 98 Links - Bushing Construction - Full Nickel Plated - Heavy Duty Structure - Width: 13.1 mm - Drivetrain Speeds: Single Speed 1/2" x 3/16" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 800g
11 speed eBike chain to stand up to the high torque of a motor. - Built strong for your eBike - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems - Mushroomed Pin Riveted - 1/2" x 11/128"
- 1/2" x 1/8" - 100 Links - Single-speed - BMX Racing, Freestyle - Hollow Pins - Half Link Design
- 1/2" x 1/8" - 100 Links - Single speed - BMX Racing, Freestyle - Half Link Design
$28.99 - $38.99
KMC's SL Chain sets a new standard with weight reduction, improved shifting performance & enhanced durability. - 1/2" x 1/8" - 112 Links - Black - 1 speed - 1/8" Track Bikes & BMX Racing, Freestyle - Hollow Pins & Plates - Special Dynamic Configured Plates - Super Light: 349 grams - Anti-Drop Design - Heavy Duty Structure - Hollow Inner Plates - Hollow Outer Plates - Hollow Pin - Inner Plate Chamferring - Mud Shedding Design - Special Dynamic K Configuration - Stretch Proof Treatment
$16.99 - $17.59
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain. - High pin power with reinforced durability - Offers a quieter riding experience - Anti-drop design - Inner plate chamfering helps to provide fast and smooth shifting - Internal gear hub system compatible - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Half Link Chain: No
S1 Rustbuster is a basic, affordable replacement 1/8" chain. - For non-derailleur bikes: BMX, cruisers, etc. - Rustbuster rust-proof finish, suitable for beach environments and winter commuting - Includes KMC Master Link - Links (links): 112 - Color: Silver - Width: 9.3 mm - Drivetrain Speeds: Single Speed 1/2 x 1/8-inch - Chain Connection Type: Reusable Master Link - Half Link Chain: No
X-Superlight series chains are high-quality, high performing chains offering amazing shifting performance on any drivetrain you choose. For athletes looking for the lightest, strongest, smoothest shifting chain look no further. The main characteristic of the black Diamond Like Coating (DLC) is reduction of abrasive wear. Besides this, it’s surface hardness is higher than most coatings, this ensures a long-term function, optimal stability and higher durability. - Includes KMC Missing Link 11 - Compatible with all 11 speed systems (including Campagnolo/Shimano/SRAM) - Weight: 243g
$112.99 - $163.99
-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g
- 1/2" x 11/128" - 116 Links - TI (Titanium Nitride Coating Gold) - 10 speed - Compatible with Shimano, Sram & Campagnolo 10 Speed Systems - Mushroomed Pin Riveted - 273 grams
- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM - Use: Mountain/Road - Size: 11/128-inch - Width: 5.9mm - Weight: 273 grams - 116 links
Page 1 of 2 Next page